4/ Connect And Configure Your Hardware /17; U-Mix Control Pro In Internal Mixer Mode /17 - MIXVIBES CROSS DJ User Manual

4/
connect and
Configure your
Hardware
this chapter explains how to connect your different hardware components. the
steps you need to perform depend on whether you use a controller, which one and
if you wish to use croSS DJ in internal or external mixer mode. also dependant is
if you wish to use external audio sources like a turntable, a cDJ player or an mp3
player with your audio files on your computer
In its default setting CROSS DJ will configure all MixVibes audio interfaces auto-
matically when they are plugged in. You can find the corresponding option Auto-
select MixVibes devices at startup on the Preferences/Audio dialog. If you have
multiple mixVibes audio interfaces croSS selects them in the following: u46mK2,
u-mIX44 and u-mIX control pro.
4.1 U-MIX CONTROL PRO in Internal Mixer Mode
the u-mIX control pro hybrid controller has an integrated audio interface with
two stereo outputs. one of the outputs is used for the mix out signal, the other one
is used for the Headphone/cue signal.
1 use the rca cable and connect outputs 1/2 of your u-mIX control pro to
the sound system (amplifier, powered speakers, or home stereo)
2 connect your headphones to one of the Headphones sockets on the front
panel of your u-mIX control pro.
.
17