U-Mix Control Pro And External Audio Sources /21 - MIXVIBES CROSS DJ User Manual

11 open the list box output 1. on Windows select u-mix control pro 1/u-mix
control pro 2 and on oS X select output 1/output 2. this output receives the
signal from player a.
12 open the list box Output 2. on Windows select U-Mix Control Pro 3/U-Mix
Control Pro 4 and on oS X select output 3/output 4. this output receives
the signal from player B.
4.3 U-MIX CONTROL PRO and External Audio
Sources
It is very easy to integrate external audio sources into your croSS DJ setup. an
internal audio source can be a turntable, a cD player, an mp3 player or any other
device that provides a line level audio signal. you need an audio interface that has
at least one input; otherwise it is not possible to use external audio sources.
To configure external audio sources three steps need to be done:
•
Make the cable connection and configure the input mode of your audio interface
input port
•
route the external audio source into the croSS DJ software mixer
•
assign the inputs to the players
•
Set the player input mode to line In
Connect and Configure your Hardware
21