MIXVIBES CROSS DJ User Manual page 36

the control on/off has been assigned to the controller. a grey button shows
information about the mIDI message that the button on the controller sends to
croSS DJ. you can click this button to change the assignment between the control
and the button/knob/fader on your controller. at the very right you can see buttons
with a minus sign and a plus sign. clicking the Minus button remove the mapping
for a control; clicking the Plus button opens a dialog where you can create a new
mapping.
let's have a look at some examples that will explain the basic steps and the differ-
ent options for mapping a control.
1 click the Plus button before the category with the control that you wish you
map. for this example open category FX 1.
2 click the Add mapping button next to ON/OFF. the
mIDI control mapping windows is opened.
Connect and Configure your Hardware
36