MIXVIBES CROSS DJ User Manual page 37

Connect and Configure your Hardware
3 press/move the mIDI button/mIDI control that you want to assign to fX1 |
on/off. croSS DJ receives a mIDI event from your controller.
In section MIDI event you can see information about the mIDI event that was
received. In this example we have pressed a button. Buttons normally send
Note messages (here 0x46; the prefix 0x is shown as the shown number is
a hexadecimal value). mIDI events are sent on a particular mIDI channel; in
this example the controller was configured to send its messages on chan-
nel 10.
now have a look at section Available Presets. for an event that was trig-
gered by a button and that is mapped to a croSS DJ control with on/off
states, croSS DJ provides two different presets. you can select one of the
37