MIXVIBES CROSS DJ User Manual page 125

Relative Encoders
Several of the knobs act as relative encoders, i.e. their value field will indicate a
relative change. 0 means that no change occurred, values 01 to 63 describe a posi-
tive change and values 127 down to 64 describe a negative change.
Value Description
0x00 no change occurred. control is stationary.
0x01 the controller incremented its value by 1 since the last report
0x02 the controller incremented its value by 2 since the last report
... ...
0x3f the controller incremented its value by 63 since the last report
0x40 the controller decremented its value by 64 since the last report
0x41 the controller decremented its value by 63 since the last report
0x7e the controller decremented its value by 2 since the last report
0x7f the controller decremented its value by 1 since the last report
LED (Computer to Controller)
the following table shows the mIDI messages for the different leDs on the con-
troller.
Control Name
master clip
treb
mid
Bass
fX
loop
you can send a value to these leDs and to all buttons with an integrated leD to
control the leD state. the following table shows the values you can use:
Value
0x7f (=127 decimal)
0x00 (=0 decimal)
0x14 (=20 decimal)
0x28 (=40 decimal)
Message Type Key/Note
note on/off 0x3
note on/off 0x12
note on/off 0x13
note on/off 0x14
note on/off 0xe
note on/off 0xD
LED Status
leD is on
leD is off
leD blinks every 0,2s
leD blinks every 0,4s
List of MIDI Messages
MIDI Channel
3
a=1, B=2
a=1, B=2
a=1, B=2
a=1, B=2
a=1, B=2
125