Using Locators (Hot Cues) /102 - MIXVIBES CROSS DJ User Manual

Jumping to Cue Point and start Playback temporarily
perform one of the following actions to jump to the cue point and to start playback.
all actions set the play marker to the cue point position. the track is playing as
long as the button/key is pressed. If you release the button/key, playback is paused
and the play marker is set to the cue point position again.
•
click the Cue/Stop button while the track is playing.
•
press the shortcut (C), while the track is playing.
•
press the CUE button on u-mIX control pro/u-mIX control 2 while the
track is playing.
9.4 Using Locators (Hot Cues)
Several of the professional cDJ players allow you to store cue points in a track
either on a memory card or in the memory integrated into the cDJ player. you can
jump to a stored cue point – sometimes called hot cue – by pressing a button on
the cDJ player.
croSS DJ allows you to store cue points as well; stored cue points are called loca-
tors. Below the two players you can see the locator section that informs you of the
number and the position of the locators in the currently loaded track.
Locator Markers
Locator Section
Setting Locators and Jumping to Locators
perform the following steps to set a locator:
1
Set the playback marker to the position where you wish to set the locator or
wait until playback reaches the desired locator position.
Advanced Features
102