MIXVIBES CROSS DJ User Manual page 101

you can use the cue/Stop and cue/play button to start the playback at the position
of the cue point and to set the cue point position.
Setting the Cue Point
use the Snap button and the Snap Length selector on the player to enable/disable
the Snap feature. then perform one of the following actions to set the position of
the cue point::
•
click the Cue/Stop button while the track is paused.
•
press the shortcut (ª)+(C).
•
Hold the SHIFT button on u-mIX control pro/u-mIX control 2
and press the CUE button while the track is playing. When the player is paused
press the CUE button. (note: SHIFT+CUE also works.)
TIP The last cue point that you set in a track is stored in the peak files au-
tomatically.
Jumping to Cue Point and start Playback
perform one of the following actions to jump to the cue point and to start playback:
•
click the Cue/Play button.
•
press the (¢) key.
•
Hold the SHIFT button and press PLAY/PAUSE on u-mIX control
pro/u-mIX control 2 to activate cue/play from the controller.
•
Hold the CUE button and press the PLAY/PAUSE button on u-mIX control
pro/u-mIX control 2. playback will continue when you release both buttons.
Cue/Stop Cue/Play
Advanced Features
101