Sip Proxy Parameters; Failover To Secondary At&T Ip Border Element (Ipbe); Figure 13: Selecting Ip Trunk Module; Figure 14: Sip Proxy Parameters - Nortel BCM50 Release 3.0 SIP Configuration Manual

AT&T IP Flexible Reach Service
Nortel BCM50 Release 3.0 SIP Configuration Guide

4.3 SIP Proxy Parameters

Configuration Resources Telephony Resources:
Under Select module
type "IP Trunks" and click on the "Sip Proxy" tab (see figures below).
Populate the "Domain" as the IP address of the AT&T IP Border Element.

Figure 13: Selecting IP Trunk Module

Figure 14: Sip Proxy Parameters

4.3.1 Failover to Secondary AT&T IP Border Element (IPBE)
© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T
logo and all other AT&T marks contained herein are trademarks of AT&T
Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners.
Issue 0.7 Page 21 of 37