Multi-Photo Scan / Multi Crop In Scangear - Canon MultiPASS F60 Software User's Manual

3. In the scanner window, specify the preview scan options for your
document as necessary.
4. Click Preview.
5. Review the display of your scanned preview image. Adjust the
properties of the image as necessary.
6. Replace your document in the automatic document feeder (F80 only).
7. Click Scan.
When complete, the image appears in the display area of your Windows
application.

Multi-Photo Scan / Multi Crop in ScanGear

You can scan two or more photos (small documents) at one time using
Multi-Photo Scan (Simple Mode) or Multi Crop (Advanced Mode).
Each photo will constitute as one image.
Multi-Photo Scan (Scanning two or more photos at one time (No
detailed settings))
When scanning two or more photos without having to specify in detail
such things as the scanning area, use Multi-Photo Scan in Simple Mode.
However, photos that have an overall whitish appearance or have a
whitish border may not be cropped accurately. Also, documents other
than photos (particularly documents printed on white paper, hand-
written text, business cards etc.) may also not be cropped accurately.
Automatically there is a correction of documents that are not straight.
However this will not happen if the image is off by more than 10 degrees.
The document is scanned in the Color Mode of Color and Resolution of
300 dpi.
1. If using the Toolbar to scan, click Settings on the Toolbar. On the
Toolbar Settings tab, click Show scanner driver before scanning, select
it and click OK.
92 Scanning
0
Chapter 5