Canon MultiPASS C5000 User Manual page 20

Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To ensure reliable operation of the
MultiPASS C5000 and to protect it from overheating, do not block
or cover these openings. Do not block the openings by placing the
unit on a bed, sofa, rug, or other similar surface. Do not place the
unit near a radiator, nor in a closet or built-in cabinet unless proper
ventilation is provided.
Operate the MultiPASS C5000 only from the type of power source
indicated on the unit's label. If you are not sure of the type of power
available, consult your dealer or local power company.
Do not allow anything to rest on the power cord, and do not locate
the MultiPASS C5000 where the cord will be walked on. Make sure
the power cord is not knotted or kinked.
Do not push metal objects of any kind into the slots or openings on
the cabinet. This could result in a risk of fire or electric shock.
Do not allow small objects (such as pins, paper clips, or staples) to
fall into the MultiPASS C5000. If something does fall into it that you
cannot remove, unplug the unit immediately and call the Customer
Care Center.
Unplug this product from the wall outlet and call the Customer Care
Center if any of the following conditions exist:
•
The power cord or plug is damaged or frayed.
•
Liquid is spilled into the unit, or if the unit is exposed to rain
or water.
•
Smoke, unusual noises, or odors come from the unit.
•
The unit has been dropped or the cabinet has been damaged.
•
The unit does not operate normally when you have followed the
operating instructions. Adjust only those controls that are
covered by the operating instructions in the Quick Start Guide
and this User's Manual. Improper adjustment of other controls
may result in damage and may require extensive work by a
qualified technician to restore the product to normal operation.
1-6 Introduction Chapter 1