Canon MultiPASS C5000 User Manual page 92

Use automatic
dialing.
Press START/COPY.
Chapter 4
Press the one-touch speed dialing button (1 through 6)
assigned to the number you wish to fax to; the name
assigned to that button is displayed.
OR
Press and enter the appropriate two-digit
CODED DIAL
coded speed dialing code.
If a number is not registered for the button or codes, the
LCD displays message. Make sure you pressed
NO TEL #
the correct button or entered the correct code and that
the number you want to dial is entered correctly.
If you make a mistake, press
one-touch speed dialing button or press
re-enter the code.
DIALING
If you do not press
START/COPY
MultiPASS C5000 starts sending you document
automatically.
If the light is flashing for any reason, correct the error
ALARM
and press . You may need to open the operator panel to
STOP
remove the document from the ADF (see page 10-3).
Sending Faxes With the MultiPASS C5000
CANON FAX BACK
CCSI/MKT
. Then press the correct
STOP
CODED DIAL
within five seconds, the
and
4-5