Messages Displayed During Sending; Cancel Sending - Canon MultiPASS C5000 User Manual

Messages Displayed During Sending

When sending a document, the MultiPASS C5000 displays the following
messages as the call progresses.
TRANSMIT
TX/RX NO.
When it is finished sending the document, the MultiPASS C5000 beeps
once; the LCD displays:
TRANSMITTING OK

Cancel Sending

To stop sending before a fax is complete, follow these steps:
Press STOP.
Press *
or #.
If you press
to open the operator panel to remove the document (see page 10-3).
4-10 Sending Faxes With the MultiPASS C5000
XXXX
If you are sending manually, the transmission is cancelled
immediately.
If you are sending from memory, the LCD displays:
CANCEL
*
to cancel or press # to continue the transmission.
Press
TX/RX CANCELLED
Transmission continues.
while the document is being scanned, you may need
STOP
*YES #NO
Chapter 4