3.7.2 Verify error at address of area between 0x80000 and 0xFFFFF
Meaning: application could not be loaded to external SRAM
Cause: MCU is not set to external ROM mode
Solution: check routing CS0
set MD0 to low
click reset button of debugger of Softune Workbench
set MD0 to high
call menu Debug->Load Target
AN-910011-18
Chapter 3 Setting the MB91FV360 to External ROM-mode
Figure 11 Verify error during loading the code
- 18 -
© Fujitsu Microelectronics Europe GmbH
code
of
the
application could
not be loaded