Janome JR3000 Series Operation Manual page 7

Do not use where flammable or corrosive gas is present.
Leaked gas accumulating around the unit causes explosions and fire.
Make sure that you securely install the unit in a place that can fully withstand
both the unit's weight and its usage.
In addition, for units with a cooling fan on the back, allow for 30cm or more
clearance between the back of the unit and the wall.
If installation is inadequate, the unit can drop or fall over causing injury and unit
breakdown. Also, inadequate installation causes overheating and fire.
Make sure to power the unit within its rated current range.
Failure to do so causes electric shocks, fires, and unit malfunction.
Plug the power cord into the wall outlet firmly.
Failure to do so causes the plug to heat up resulting in fire.
Be sure to use the unit within its indicated voltage range.
Failure to do so causes fires and unit malfunction.
When inspecting or lubricating the unit, unplug the power cord from the wall
outlet, then remove the cord from the main unit and make sure there is no
electrical current. Also, do not touch any of the power inlet pins within 5
seconds of removing the power cord. Failure to follow these steps causes
electric shocks and injury.
Dispensing Specifications
FOR YOUR SAFETY
Danger
Warning
6 Desktop Robot JR3000