Janome JR3000 Series Operation Manual page 3

Attention
Attention
Warning
Warning
Note: The operation methods described in this manual are indicated as follows:
Operation via the teaching pendant
TP
Operation via PC (JR C-Points II)
PC
Dispensing Specifications
To make full use of the machine's functions and capabilities, make sure that
you use the robot according to the correct handling/operation procedures
that are written in the manuals listed on the previous page. Do not handle or
operate the robot in ways not covered in these manuals.
If you turn OFF the power after making changes to robot's settings or data
without saving, those changes are lost and the robot will revert to its original
settings. Make sure that you save any changes to data and/or settings.
Make sure that the machine is grounded and do not use the
machine if it is not grounded.
Using the machine without sufficient grounding can cause electric
shock, fire, accidental operation and machine breakdown.
Make sure that the machine power supply is OFF before
connecting the power cord.
Failure to do so could cause electric shock and/or injury.
2 Desktop Robot JR3000