Janome JR3000 Series Operation Manual page 9

FOR YOUR SAFETY
Caution
Do not drop or jar the unit during transport and/or installation.
This causes injuries or damages the unit.
Before performing any operation, ensure there is no imminent danger to any
of the operators. Failure to do so causes injury.
Use the unit in an environment between 0 and 40°C, with a humidity level of
20 – 90%, and without condensation.
Use outside of these conditions can cause unit malfunction.
Use the unit in an environment where no electrical noise is present.
Failure to do so causes unit malfunction or breakdown.
For models with IO-S circuits, when installing the unit, take safety measures
such as setting up area sensors and an enclosure.
If there are no safety measures in place and someone enters the area of operation
when the robot is running, they may be injured.
Keep the emergency stop switch within reach of the operator when running
or operating the robot.
If the robot is operated when the emergency switch is not within reach, it may not
be possible to stop the robot immediately and safely. This is potentially dangerous.
Make sure that you regularly perform a function check for the emergency
stop switch. Also, for models with IO-S circuits, regularly perform an IO-S
circuit function check.
If you perform work without making a circuit check, you or the operator will not be
able to immediately and safely stop the robot in an emergency. This is potentially
dangerous.
Dispensing Specifications 8 Desktop Robot JR3000