Janome JR3000 Series Operation Manual page 67

Dispense Conditions in Individual Program Settings
[Program]  [Individual Program Settings]  [Individual Data]  [Dispense Condition] 
PC
[Wait Time at Stop]
Dispense Conditions in Condition Data
[Data]  [Dispense Condition]  [Add/Edit]  [Wait Time at Stop]
PC
Select [Dispense Condition] from
the [Individual Program Settings]
– [Individual Data] dialog. The
dialog below is displayed.
Enter the values you want to
modify in [Wait Time at Stop].
To register condition data
dispense conditions, select
[Dispense Condition] from the
[Data] pull-down menu. The
dialog box below appears.
Enter the values you want to
modify in [Wait Time at Stop].
Dispensing Specifications 66 Desktop Robot JR3000