Table of Contents
Advertisement
Turn on PV Inverter
5.3.7.3 Install Settings
!
Only professional installer can do the following changes and settings.
Settings changed may cause damage to the converter.
Correct passwords are requested when entering Install Settings. Install Settings
for user and installation technician are different. The password cannot be revised.
After confirmation as the general user password, user can set Inverter ID, and
Insulation.
Password
21. Jun 2010 13:50
*
After confirmation as the installation technician passwords, system will add setting
options of DC-Injection, Return to Factory, Country and Grid Setting. In Grid Setting
selection, technician can adjust the parameter for protection (OVR, UVR, OFR, UFR,
etc.) to Utility. Before setting of the protection to Utility in Grid Settings page, please
set country as "Custom". Return to Factory will turn inverter to default setting and delete
all the records of event and energy.
Install Settings – 1/2
Inverter ID
Insulation
RCMU
DC Injection
Return to Factory
Country
Grid Settings
CAUTION!
Install Settings – 1/2
Inverter ID
ENT
Insulation
RCMU
ENT
Country
Grid Settings
EXIT
Reconnection Time [
Ramp-up Power
Figure 5-12 : Install Setting Page -User Mode
21. Jun 2010 13:50
[
001
]
[
---
]
[
Yes / No ]
Germany MV
Figure 5-13 : Install Setting Page -Installer Mode
21. Jun 2010 13:50
[
001
]
[
---
]
Germany MV
60
S
]
[
]
%/m
20
Install Settings – 2/2
Reconnection Time
Ramp
-up Power
PID
54
Install Settings – 2/2
21. Jun 2010 13:50
PID
[
0
21. Jun 2010 13:50
[
60
]
S
[
]
%/
m
20
[
] Hour
0
] Hour
Advertisement
Chapters
Table of Contents
