3.2.3 Fixed Methods
The inverter can be installed by following methods:
1. Install on the ground directly.
2. Install on the base mounted on the ground.
3. The recommended distance between bottom of solar inverter and AC/DC
cables should be at least 1-meter high.
Front
1m
3.2.4 Dimensions of central inverter for indoor installation
For indoor installation, the hot air generated from inverter should be conducted
to outside by ventilation duct that is fixed on the top of the inverter.
The interal air outlet information of inverter can be referred to Figure 3-5 &
Figure 3-6.
Rear
Base
Trench
Figure 3-4 : Fixed Methods
Figure 3-5 : Dimensions without top cover
Transportation & Installation Preparation
Front
19
Rear
1m
unit: mm