Fastening The Shrouds In Frame Size R8; Top Entry Busbar Shroud; Vertical Busbar Shroud - ABB ACS800 Cabinet Installation And Operating Instruction

90

Fastening the shrouds in frame size R8

Top entry busbar shroud

Place the top cover to
position (3) with the tabs
entering the slots of the
shroud.

Vertical busbar shroud

2 Remove the protective film from the
shroud surfaces.
1
Cut the corner piece
to make space for
the PE terminal of
the drive module.
Mechanical installation of non-pre-assembled units (ACS800-04M)
4
2
Remove the protective
film.
1
Step drill lead-throughs
for the busbars.
Used in the right-
hand-side assembly
Fasten the shroud plates to
3
each other and to the drive
module.
Fasten the
4
shroud to the
drive module.
Top entry busbar shroud fastened
Alternative
positions
Vertical busbar shroud fastened
Note: When connecting the power cables,
remove the front (and top and side) shroud by
undoing the fastening screws.
3