Drive Module Of Frame Size R7 On Its Back - ABB ACS800 Cabinet Installation And Operating Instruction

34

Drive module of frame size R7 on its back

Ensure that the cooling air will flow freely and
is clean. Use filter mats if the input cooling air
is taken near the floor surface and contains
dust.
Planning the cabinet installation
Prevent dripping water from
entering the drive module.
Support the module from below.
The fastening points are not
sturdy enough to carry the
weight of the module when laid
on its back.
Note: Air inlet into the drive module
goes through the front gratings of
the module. Do not cover them.
Leave space above the module
for maintenance
Air baffle for preventing cooling
air recirculation
64796003_bottom_exit_copy<64796003>.asm