Categorization According To The Frame Size; Categorization According To The Plus Code; Contents - ABB ACS800 Cabinet Installation And Operating Instruction

12
For installation instructions of optional equipment, see their manuals.
For example installations in Rittal TS 8 cabinet, refer to ACS800-04/U4 Rittal TS 8
Cabinet Installation [3AFE68372330 (English)].

Categorization according to the frame size

The instructions, technical data and dimensional drawings which concern only
certain frame sizes are marked with the symbol of the frame size R7 or R8. The
frame size is not marked on the drive designation label. To identify the frame size of
your drive, see the rating tables in chapter Technical data in ACS800-04/04M/U4
Hardware Manual [3AFE64671006 (English)].

Categorization according to the plus code

The instructions, technical data and dimensional drawings which concern only
certain optional selections are marked with plus codes, e.g. +E210 or +H354. The
options included in the drive can be identified from the plus codes visible on the type
designation label of the drive. The plus code selections are listed in chapter
ACS800-04/U4 and ACS800-04M

Contents

The chapters of this manual are briefly described below.
About this manual
The ACS800-04/U4 and ACS800-04M
Planning the cabinet installation
examples, free space requirements around the drive module for cooling and cabinet
cooling data.
Mechanical installation of pre-assembled units (ACS800-04/U4)
mount a pre-assembled drive module into a cabinet.
Mechanical installation of non-pre-assembled units (ACS800-04M)
assemble the drive from the assembly kits.
Checking the installation
of the drive.
Dimensional drawings
Circuit diagrams
Unexpected Start function (+Q950).
Assembly drawings
About this manual
under
introduces this manual.
instructs on general cabinet design, gives layout
helps in checking the mechanical and electrical installation
contains the dimensional drawings of the drive modules.
shows an example circuit diagram for employing the Prevention of
contains a few step-by-step assembly drawings.
Type code.
describes the drive module.
The
instructs how to
instructs how to