Fastening The Drive Module To The Pedestal Via The Adapter - ABB ACS800 Cabinet Installation And Operating Instruction

110

Fastening the drive module to the pedestal via the adapter

The DC busbars (+H356) are included in the installation examples below. The
adapter has been connected to the drive module.
1. Frame size R7: Remove the "long front" side plate of the pedestal.
Frame size R8: Remove the "long front" side plate of the adapter.
2. Slide the drive module with the adapter fastened onto the pedestal.
3. Connect the busbars.
4. Frame size R7: Fasten the side plate of the pedestal.
Frame size R8: Fasten the side plate to the adapter and the pedestal.
Frame size R7
1
Frame size R8
1
3
Mechanical installation of non-pre-assembled units (ACS800-04M)
2
1
M6
M5
4
M5
1
2
4
3
M5
4
M6
4