Optional Selection +H363 - ABB ACS800 Cabinet Installation And Operating Instruction

Optional selection +H363

This selection enables the connection of the DC output and the brake resistor output
to the opposite sides of the pedestal. The installation below requires also optional
selection +H356. The UDC- busbar and R- busbar are taken from the +H356 parts,
the R+/UDC+ busbar from the +H363 parts. For instruction on how to connect the
busbars to the pedestal frame, see
(+H356 and +H363 only) on page
1. Connect the UDC- busbar.
2. Connect the R+/UDC+ busbar.
3. Connect the R- busbar.
R+
R-
U2
V2
W2
Connecting the DC busbars to the pedestal
76.
1
UDC-
UDC+
2
3
Pedestal upside down
DC output connected to the right
Mechanical installation of non-pre-assembled units (ACS800-04M)
79