Mechanical Installation Of Pre-Assembled Units (Acs800-04/U4); What This Chapter Contains; Moving And Unpacking The Unit - ABB ACS800 Cabinet Installation And Operating Instruction

Mechanical installation of pre-assembled units
(ACS800-04/U4)

What this chapter contains

This chapter describes how to install a pre-assembled drive module into a cabinet.
First, before-installation information is given, such as required tools, moving the unit
and checking the delivery. Then, the mechanical installation procedure is described.

Moving and unpacking the unit

WARNING! The drive is heavy [frame size R7: 100 kg (220 lb), frame size R8:
200 kg (441 lb)]. Lift the drive by the upper part only using the lifting lugs attached to
the top of the unit. The lower part will be deformed from lifting. Do not remove the
pedestal before lifting.
Do not tilt the drive. The centre of gravity of the unit is high. The unit will overturn
from a tilt of about 6 degrees. An overturning unit can cause physical injury.
Views of frame size R7
Do not lift by the lower
part of the frame.

Mechanical installation of pre-assembled units (ACS800-04/U4)

Do not tilt!
39