Assembling Procedure For Units With Busbars On The Short Side (+H360); Working Order - ABB ACS800 Cabinet Installation And Operating Instruction

104

Assembling procedure for units with busbars on the short side (+H360)

Working order

References to instructions in this chapter are printed in italic in the table below. The
pictures represent frame size R7 with the following orientations.
Left
Step
1
Preparing
the pedestal
W2
V2
U2
2
Preparing
the adapter
Mechanical installation of non-pre-assembled units (ACS800-04M)
Front
Pedestal viewed from above
Right
If
AC busbars on
W2
the right side
V2
U2
AC busbars, R-,
R+/UDC+ and
UDC- busbars on
the right side
(+H356 required)
AC busbars on
the left side
AC busbars, R-,
R+/UDC+ and
UDC- busbars on
the left side
(+H356 required)
AC busbars on
the right or left
side
AC busbars, R-,
R+/UDC+ and
UDC- busbars on
the right or left
side
(+H356 required)
Instruction
Go to step 2.
1. See Connecting the DC busbars to the pedestal
(+H360 +H356 only) on page 107.
2. Go to step 2.
1. See Swapping the pedestal output busbars to the
left-hand side on page 106.
2. Go to step 2.
1. See Swapping the pedestal output busbars to the
left-hand side on page
2. See Connecting the DC busbars to the pedestal
(+H360 +H356 only) on page
3. Go to step 2.
Go to step 3.
1. See Preparing the adapter (+H360 +H356 only)
page 108.
2. Go to step 3.
106.
107.
on