ABB ACS800 Cabinet Installation And Operating Instruction page 105

Step
3
Fastening
the adapter
to the drive
module
4
Fastening
the pedestal
by the base
(not performed
for wall-
mounted units)
5
Fastening
the adapter
to the
pedestal
6
Connecting
the output
busbars
7
Wall
mounting
(not
performed for
base-mounted
units)
8
Fastening by
top
If
-
Base mounting
from outside
Base mounting
from inside
-
Units with vertical
busbars
wall-mounted unit
base-mounted
unit
Mechanical installation of non-pre-assembled units (ACS800-04M)
Instruction
1. See Fastening the adapter to the drive module
page 109.
2. Go to step 4.
1. See Clamping the pedestal with the outside brackets
on page 80.
2. Go to step 5.
1. See Fastening the pedestal through the holes inside
the pedestal on page 80.
2. Go to step 5.
1. See Fastening the drive module to the pedestal via
the adapter on page 110.
2. Go to step 6.
1. See Connecting the output busbars on the short side
of the module on page 111.
2. Go to step 7.
1. See Fastening the drive module to wall (wall-
mounted units only, not for base-mounted units)
page 81.
1. See Fastening the drive module by top to the cabinet
frame on page 81.
105
on
on