Table of Contents
Advertisement
it will disappear after a short period of use.
9. Inform the customer that the Serial number for the appliance is located on the
data label located behind the lower cover and attached underneath the burner
module.
10. Hand the literature pack with this guide to the customer. Place inside or attach the
instruction guide supplied with the ceramic fuel affect to this guide.
16. SERVICING & PARTS REPLACEMENT
Always turn off the gas supply and remove the batteries from behind the fascia
lower access panel before commencing any servicing (The appliance inlet "T"
connector incorporates an isolating valve).
It is recommended that, at least once a year, the appliance is disconnected and the
fireplace opening checked and cleared of any debris.
This product uses fuel effect pieces containing Refractory Ceramic Fibres (RCF),
which are man-made vitreous silicate fibres. Excessive exposure to these materials
may cause irritation to eyes, skin and respiratory tract. Consequently, it is
important to take care when handling these articles to ensure that the release of
dust is kept to a minimum. To ensure that the release of fibres from these RCF
articles is kept to a minimum, during installation and servicing we recommend that
you use a HEPA filtered vacuum to remove any dust and soot accumulated in and
around the fire before and after working on the fire. When replacing these articles
we recommend that the replaced items are not broken up, but are sealed within a
heavy duty polythene bag, clearly labelled as RCF waste. RCF waste is classed as a
stable, non-reactive hazardous waste and may be disposed at a landfill licensed to
accept such waste. Protective clothing is not required when handling these articles,
but we recommend you follow the normal hygiene rules of not smoking, eating or
drinking in the work area and always wash your hands before eating or drinking.
Check that the appliance is clean and that soot or debris is not blocking the gaps
!
between the ceramic fuel effect pieces causing an imperfect flame.
Check that soot or debris is not impairing the electrode spark or pilot burner.
!
Check that soot or debris is not blocking any of the holes in the main burner.
!
After servicing, make sure that the ceramic fuel effect pieces are replaced correctly
!
as described in the installation instructions supplied with the ceramic fuel effect.
Always test for gas soundness and spillage after servicing the appliance.
!
©
Baxi Heating U.K. Limited 2006.
INSTALLER GUIDE
Page 31
Advertisement
Table of Contents
