Installing The Anti-Tip Bracket - KitchenAid KGRA806P Technical Education

INSTALLING THE ANTI-TIP BRACKET

WARNING
Tip-Over Hazard
A child or adult can tip the range and
be killed.
Connect anti-tip bracket to rear range
foot.
Reconnect the anti-tip bracket, if the
range is moved.
Failure to follow these instructions can
result in death or serious burns to
children and adults.
PARTS SUPPLIED
(2) Plastic Anchors
(1) Anti-Tip Bracket
Template
(2) Screws
2-10
NOTE: The anti-tip bracket can be installed to
hold either the right or left rear leg of the range.
1. Determine which leg you wish to anchor to
the floor.
2. Place the template on the floor in the
range opening so that the top edge is
against the wall, molding, or cabinet, and
the template is in the location where the
anti-tip bracket will be installed.
3. Tape the template to the floor.
NOTE: For mounting to a wood floor, proceed
with step 4. For concrete or ceramic floors,
proceed to step 5.
4. To mount the anti-tip bracket to a wood
floor:
a) Use the template to mark the hole loca-
tions to be drilled.
b) Use a 1/8" drill bit and drill the two holes.