KitchenAid KGRA806P Technical Education page 41

5. To remove the broil burner:
a) Remove the ignitor from the broil burner
(see step 4).
b) Remove the rear screw from the broil
burner.
c) Loosen the front broil burner screw,
slide the burner off the orifice, and
remove the burner.
Rear Screw
Front Screw
Broil Burner
Orifice
4-15
6. To remove the Halo
a) Remove the front screw from the broil
burner and allow it to drop down.
b) Remove the rear screws from the Halo
broil element.

Halo
Rear Screw

c) Pull the Halo
that the element terminal wires are in-
side the oven cavity, and disconnect
the wires from the terminals.
Element Wires

broil element:
Front Screw
Broil Element
Rear Screw
broil element forward so
