KitchenAid KGRA806P Technical Education page 19

b) Pull the plastic cap off the gas distribu-
tion valve conversion cap.
Plastic Cap
c) Unscrew the conversion cap from the
gas distribution valve and remove it and
the plastic cap. Note the difference be-
tween the L.P. and Natural gas ends of
the cap.
Conversion Cap Set For
Use With (N) Natural Gas
L.P. Gas
Natural Gas
10. Turn the gas supply valve handle on.
2-7
d) Install the loop on the plastic cap over
the natural gas side of the conversion
cap.
e) Install the plastic cap and the conver-
sion cap on the gas distribution valve
with the L.P. side facing up (you will see
"LP" stamped inside the cap, as shown
below).
f) Reinstall the storage drawer.
Conversion Cap Set
Plastic Cap
For Use With L.P. Gas
L.P. Gas
Gas Valve Handle To "On" Position