KitchenAid KGRA806P Technical Education page 17

c) Use an 8 mm socket and carefully re-
move the orifice spud from each of the
three standard surface burners.
Orifice Spud
3. To convert the TripleTier
burner:
a) Remove the grate and burner caps from
the cooktop.
b) Remove the four T-20 torx screws from
the burner ring and remove the ring.
Burner Ring
Screw (1 of 4)
c) Remove the three T-20 torx screws from
the burner cover and remove the cover.
Burner Cover
Screw (1 of 3)
d) Remove the two T-20 torx screws from
Orifice Cover
(2 Screws)
e) Use a 7 mm nut driver and remove the

Crown
External
4. Install the L.P. gas orifices in the burners
as shown in the following charts (do not
overtighten them).
Rating
5,000 B.T.U.
10,000 B.T.U.
13,000 B.T.U.
Rating
11,800 B.T.U.
2,200 B.T.U.
2-5
the orifice cover and remove the cover.
two burner orifices.
Burner
Orifice
Internal
Burner
Orifice
Standard Burners
Color
Red 0.70 mm
Blue 0.95 mm
Green 1.10 mm

TripleTier Crown Burner
Color
Brown 1.00 mm
Orange 0.42 mm
Continued on the next page.
Size Burner
RF & LR
RR
LF
Size Burner
External
Internal