b) Lift the rear of the cooktop off the unit,
and set it aside.
9.
To remove a standard surface burner
and ignitor:
a) Remove the cooktop (see step 8).
b) Remove the gas line.
c) Disconnect the ignitor wire from the
terminal.
d) Remove the two bracket screws from
the burner box.
Ignitor Wire
Bracket Screw (1 of 2)
Surface Burner
Gas Line Nut
e) Remove the two hex-head bracket
screws and remove the burner from the
bracket.
f) Remove the screw from the ignitor.
Ignitor Screw
10. To remove the TripleTier
and ignitor:
a) Remove the cooktop (see step 8).
b) Remove the two gas lines.
Gas Line Nuts
4-10
Bracket Screws
Burner base