Siemens SIMATIC FM 458-1 DP User Manual page 33

Terminal
assignment at
cable SC62, end D
Terminal
assignment at
cable SC62, end E
NOTE
Application Module FM 458-1 DP - User Manual
A5E01078222-02 Edition 03.2009
X3 Designation
36 Binary input 9
37 Binary input 10
38 Binary input 11
39 Binary input 12
40 Binary input 13
41 Binary input 14
42 Binary input 15
43 Binary input 16
44 -
45 Ground, external
Table 2-17 Terminal assignments of the interface module at connector X3,
SC62 cable end D
X3 Designation
21 Abs. value encoder 3 data D+
22 Abs. value encoder 3 data D-
23 Abs. val. encoder 3 clock cycle C+
24 Abs. val. encoder 3 clock cycle C-
25 Ground, encoder SSI
46 Abs. value encoder 4 data D+
47 Abs. value encoder 4 data D-
48 Abs. val. encoder 4 clock cycle C+
49 Abs. val. encoder 4 clock cycle C-
50 Ground, encoder SSI
Table 2-18 Terminal assignments of the interface module
at connector X3, SC62 cable end E
 In order to increase the noise immunity, the ground of the analog
and binary signals must be connected to the ground at the subrack
through the shortest possible distance.
 You will find additional information on the interface modules in
Catalog ST DA.
Product description
SU12 SB10 SB61
1 1/51 1,11/51
2 2/52 2,12/52
3 3/53 3,13/53
4 4/54 4,14/54
5 5/55 5,15/55
6 6/56 6,16/56
7 7/57 7,17/57
8 8/58 8,18/58
9 1P 1P
10 1M 1M
SU12
1
2
3
4
5
6
7
8
9
10
2-25