Environment Requirements; Carrier Requirements; Angle Requirements - Sungrow SG30CX User Manual

4 Mechanical Mounting

4.2.1 Environment Requirements

The installation environment must be free of inflammable or explosive materials.
•
The location should be not accessible to children.
•
The ambient temperature and relative humidity must meet the following
•
requirements.
Do not install the inverter outdoors in areas with high salinity, which mainly refer to
•
the areas within 500 m away from the coast. The deposition of salt fog varies largely
with nearby seawater characteristics, sea wind, precipitation, relative humidity, ter-
rain, and forest coverage.
Avoid direct exposure to sun, rain and snow.
•
The inverter should be well ventilated. Ensure air circulation.
•
Never install the inverter in living areas. The inverter will generate noise during opera-
•
tion, affecting daily life.

4.2.2 Carrier Requirements

The concrete wall should be capable of withstanding a force of four times the weight of
the inverter and be suitable for the dimensions of the inverter.
The installation carrier should meet the following requirements:

4.2.3 Angle Requirements

Install the inverter vertically or at the maximum allowable rear tilt angle. Do not install the
inverter horizontally, forward, excessively backward, sideways, or upside down.
14
User Manual