Table of Contents
Advertisement
6
6.1
b
a
c
Accessories
Accessories
Target Assembly
The Target Assembly provide a visual reference for locating the laser beam
and aligning the pipe.
•
The target assemblies have a special holographic material applied to them that
enhances the beam visibility even in bright light conditions.
•
The two target inserts have markings on them for centering the crosshair in the
center of various sizes of pipe. The small target insert is standard with the target
assembly. The large target insert is sold as an optional accessory.
Small Target Insert (a) – 150, 200, 225, 250 and 300 mm (6, 8, 9, 10, and
12 inch)
Large Target Insert (b) – 400, 450, 500 and 550 mm (15, 18 and 21 inch)
•
The reverse side of each of the targets has two retro-reflective strips. These
strips are used with the Alignmaster feature. When the ALIGNMASTER button is
pressed, the beam scans from side to side and until it detects the reflective strips
then stops between the them.
•
A small, 100 mm (4 inch) self-centering target (c) is available for these smaller
pipes.
55
Advertisement
Table of Contents
