Table of Contents
Advertisement
Standard Set-up Procedures
a) Locate Point A. Place a range rod at the center of the next manhole point. (The
rod must be plumb.)
b) Locate Point B. Attach a stringline to the slot in the top f the Piper's front
bumper. Move the Pipe until it is in line with the centerline of the pipe to be laid.
c) Locate Point C. Stand behind the Piper, close one eye, and hold up the stringline.
Align the stringline with the range rod. Look down and align a new stake approx-
imately 5 meters (15 feet) in front of the Piper. Use the LEFT and RIGHT arrow
buttons on the Remote to move the beam until it hits the stake and intersects
the stringline.
49
Advertisement
Table of Contents
