Table of Contents
Advertisement
Basic Operation
d
e
If the Alignmaster function cannot find the target, a question mark will appear
next to the target (d) to indicate "target not found". This screen will appear for two
minutes or until another button is pressed. The line position will then return to its
original position.
•
The Alignmaster routine can be interrupted at any time by pressing the Align-
master button a second time. The line position will return to its original position.
•
If the ambient light conditions are too bright for the Alignmaster function to
operate properly, the target will be shown with a question mark and a sun icon.
When the Alignmaster button is pressed the beam will appear to dim. This is
normal. The beam is actually pulsing at a very rapid rate to better control the
recognition of the target.
Alignmaster is designed to work at distances greater than 10 meters (30
feet). Demonstrations or usage at shorter distances may not find the target.
38
Advertisement
Table of Contents
