Table of Contents
Advertisement
3.9.2
Basic Operation
Setting up the Trivet Assembly and Mounting Bracket
•
Remove the four feet from the Piper, then attach the mounting plate by re-
installing the feet.
•
Attach the Piper with the mounting bracket to the Trivet Assembly and secure by
tightening the 5/8"-11 knob and stud assembly to the bracket.
•
Set the line. Place the Trivet Assembly so that the Piper is aligned with the pipe
to be laid.Turn the knobs on the trivet plate until the bubble is centered in the
Piper's cross-axis level vial. Tighten the brass lock nuts to lock the feet in place.
The Trivet Assembly (746158) includes
the mounting bracket that is attached
to the bottom of the laser.
41
Advertisement
Table of Contents
