Table of Contents
Advertisement
6.3
a
b
c
d
e
Accessories
Trivet Assembly
The trivet assembly is assembled as shown below.
a) Eye Bolt – For lowering the trivet into a manhole.
b) Trivet Post – The scales on the pole can be read from the top
g
of the post down to the center of the beam on the left side, and
from the bottom of the knob (below post) up to the center of
the beam.
c) Slider Support Assembly – Includes the locking handle for
height adjustment. The top edge equals the center of the beam.
d) Knob and Stud – Attaches the post to the base.
e) Trivet Base – Large and heavy for better stability.
f)
Leveling Foot Assembly (3) – For leveling the Piper and locking
f
in place.
g) Mounting Bracket – Attaches to the Piper with the Piper feet.
57
Advertisement
Table of Contents
