Siemens SITRANS FS230 Compact Operating Instructions page 67

4. Push cable through gland opening.
Figure 4-15
5. Connect the four wires according to list below.
6. Assemble and tighten cable gland.
Connecting sensor DSL
1. Remove lock screw and remove DSL lid.
2. Undo the flexible strap.
3. Disconnect sensor connection from DSL cassette.
4. Loosen mounting screw using a TX10 Torx driver and remove DSL cassette from housing.
5. Remove cap and ferrule from cable gland and slide onto cable.
6. Push cable through open gland; anchor cable screen and wires with clamp bar.
7. Remove terminal block from DSL cassette.
SITRANS FS230
Compact Operating Instructions, 05/2021, A5E38755607-AC
Connection - SSL cable inside
Terminal number
1
2
3
4
4.7 Connecting wall mount enclosure
Description
+15 V DC
0 V DC
B
A
Connecting
Wire color
Orange
Yellow
White
Blue
67