Application Information Guide - Siemens SITRANS FUS060 Operating Instructions Manual

9.1

Application information guide

In case the device needs service, the factory will typically request information about application
and flowmeter.
Fill in this form and attach it to a Support request on:
Service and support (http://www.siemens.com/automation/service&support)
To:
"Your local Siemens contact"
Note
Sketch
It is recommended to prepare a diagram/sketch of the installation/application explaining inlet
and outlet conditions; distance from pump; etc.
Table 9-2 Application data
Liquid
• Chemical formula
• Media name
• Concentration
• Density
• Media viscosity at 20 °C (68 °F)
• Media viscosity at process temperature
Flow measurement range
Nominal size
Process temperature
Ambient temperature (transmitter)
Process pressure
Gas/solid content
Explosion protection
Table 9-3 Device data
Serial number
Product type, Order number
Software version
Device status, error message, frequen‐
cy, ...
Flow
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL
Menu 5.2.2
Menu 5.2.1
Menu 5.2.3
Menu 2.1
Menu 1.2
Diagnostics and troubleshooting
9.1 Application information guide
From:
Company:
E-mail:
Phone no.:
Fax no.:
[mPa s]
[mPa s]
[m]
73