Optimum Optidrill B 24H Operating Manual page 30


Mount the coolant
system.

Mount all cooling
agent hoses and
fasten you these with
the hose clamps.
INFORMATION
The longer side of the too-
thed rack without toothing
must be upside.

Insert the guide ring on to
the column and on the
toothed rack.

Fix the guide ring and the
threaded pin.
Make sure that you can still
easily turn the drilling table
round the drill column.
GB
B24H | B24HV | B28H | B28HV
30
Drilling table
Coolant system
Drilling column
Cooling agent hoses
Abb.3-4: Assembly of coolant system
Guide ring
Threaded pin
Guide ring
Abb.3-5: Assembly guide ring B28H - B28HV
Translation of the original instructions Version 2.2.6 - 2020-07-21