ATTENTION!
Tighten the fixing screws of the drilling machine only as much that it is safely fixed and
cannot break away or tilt over.
If the fixing screws are too tight in particular in connection with an uneven substructure it may
result in a broken stand of the machine.
3.5.2
Installation drawings
B24H - B24HV
Version 2.2.6 - 2020-07-21
Abb.3-10: Attachment to the base
Abb.3-11: B24HV
Translation of the original instructions
Attachment (2)
B24H | B24HV | B28H | B28HV
GB
33