Table of Contents
Advertisement
Safety instructions
2.7 Information for nominated persons in control of an electrical installation
a = Conductive floor covering
c = ESD shoes or ESD shoe grounding strips
e = ESD wrist strap
1)
2)
Figure 2-1
2.7
Information for nominated persons in control of an electrical
installation
2.7.1
Proper usage
These devices are intended to be permanently installed in closed and dry rooms with a clean
atmosphere. You can find the ambient and operating temperatures to be adhered to in the
technical data. If the described environmental conditions are not observed, warranty claims
and other claims may be rejected.
Danger to life as a result of an explosion
If you operate the device in a hazardous zone, explosions can occur which can cause death,
serious injuries or material damage.
● Never operate the device in an explosive atmosphere (hazardous zone).
Danger to life when not complying with proper use of the devices
Improper use of the devices described can result in death, severe injury or material damage.
● Please observe all instructions for proper use.
The nominated person in control of an electrical installation must ensure that the following
points are observed:
● Follow the local and industry-specific safety and setup regulations. Observe the
● The operating instructions and the complete product documentation are always available
20
Only effective in conjunction with ESD shoes or ESD shoe grounding strips
Only effective in conjunction with conductive floor covering
ESD information
requirements in the guidelines specified in the "Standards and regulations" section of the
"Technical data and drawings." Ensure that the specific safety and construction regulations
and the regulations for using personal protective equipment are observed during all work.
when carrying out any work.
1)
2)
Operating Instructions Rev.201910281406 EXAMPLE
b =
ESD furniture
d =
ESD clothing
f =
Cabinet ground connection
SINAMICS SM150 6SL3810-7NN38-0AA1
Advertisement
Table of Contents
