Ecom-Das; Ecommodbus - Ecom ST Operating Instructions Manual

7.2.2 ecom-DAS 5

The software "ecom-DAS 5" can be used for the display and logging of
measured values and measured value progressions. Measurement data can
be exchanged between the software and the device via the SD card. A
recording of point measurements and course measurements during the
measuring operation can be implemented via USB.
The transmission speed and the protocol are predefined for smooth
communication between the device and the DAS 5 PC software via the USB
interface.
Parameter
Transfer speed
Protocol
NOTE
A driver is required for the communication between the device and
the DAS 5 PC software via the USB interface.
Download under:

7.3 ecomModbus

To integrate the ecom-ST into your existing software, please use the
ecomModbus documentation.
38
Adjustment field
1200 Baud − 115200 Baud 1200 Baud − 38400 Baud
DAS = DAS NT 2
Enhanced = DAS 5
---- = none
https://www.ecom.de/kundendienst/downloads/
Adjustment for DAS 5
Enhanced
ecom-ST 1.0