Table of Contents
Advertisement
4.4 Draught measurement
Pressure
-0.12
Draught
Recorded value:
-0.12 hPa
ecom-ST 1.0
For an exact measurement, it is advisable to
recalibrate the sensor as the differential
pressure sensor tends to drift due to its
hPa
sensitivity. Disconnect the draught hose on the
device and press <F4>. The sensor is
recalibrated. Reattach the draught hose. The
display shows the exact measured value, that
can be frozen with the <Store> key.
25
Advertisement
Table of Contents
Need help?
Do you have a question about the ST and is the answer not in the manual?
Questions and answers