Setting The Speaker Volume; Setting The Handset Volume - Brother 1800C Owner's Manual

Setting the Speaker Volume

1
Press Menu/Set, 1, 5, 3.
2
Press to select LOW, MED,
or
3
Press Stop/Exit.
—OR—
If you are using Hook/Hold, you can adjust the speaker volume while dialing.
You can turn the speaker off or you can select a speaker volume level. The
default setting is the lowest volume.
Press or to adjust the volume level. With each key press, the volume changes
as the LCD shows the active setting. The new setting will remain until you
change it again.

Setting the Handset Volume

1
Press Menu/Set, 1, 5, 4.
2
Press to select
or
3
Press Stop/Exit.
—OR—
You can adjust the handset volume any time you are talking on the telephone.
There are two handset volume levels,
LOW.
Press to adjust the volume level. The LCD shows the setting you are
or
choosing. The new setting will remain until you change it again.
5 - 5
I N I T I A L S E T U P
HIGH
HIGH (or LOW ), and then press Menu/Set.
LOW
or OFF, and then press Menu/Set.
and HIGH. The default setting is