Setting The Handset Volume; Setting The Speaker Volume; Setting The Ring Volume - Brother FAX 750 Owner's Manual

Setting the Handset Volume

You can adjust the handset volume any time you are talking on the
telephone. There are two handset volume levels, LOW and HIGH. The
default setting is LOW.
Press or to adjust the volume level. The display shows the
setting you are choosing. The new setting will remain until you change it
again.

Setting the Speaker Volume

You can adjust the speaker volume when your FAX/MFC is onhook (after
you pressed Hook —OR—
Press or to adjust the volume level. The display shows the setting
you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.
If you have a FAX 870MC or MFC 970MC, you can adjust the speaker
volume while you are listening to your OGM (Outgoing Message) and ICMs
(incoming messages).
If you turn the Incoming Recording Monitor to OFF (
the FAX 870MC and MFC 970MC, the Speaker for screening calls will be
disabled and you will not be able to hear callers leaving messages. The
volume for other operations can still be controlled using

Setting the Ring Volume

You can adjust the ring volume when your FAX/MFC is idle. You can select
a ring volume level or press until the ring is off.
Press or to adjust the volume level. With each key press, the
FAX/MFC rings so you can hear the current setting and the display shows the
setting you are choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.
I N I T I A L S E T U P
Speaker Phone ), by selecting a speaker volume level.
Function , , ) on
8 5
and .
31