Changing Default Copy Settings; Copy Mode (Type Of Original) - Brother FAX-4100 Owner's Manual

Changing Default Copy Settings

Press Menu and 3 to change default settings for Copy mode. These settings will
remain until you change them again by pressing Menu. Adjust the Contrast and
Quality settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
save your selection. Press Stop/Exit—OR—Press
you want to change.
Press Menu, and 3.
1.COPY MODE
2.CONTRAST
3.PAPER TYPE
If you have attached Cassette #2, be sure you turn it ON and setup the Paper
Note
Size and Cassette Usage.
(See
Setting Paper Size
.)
4750e)

Copy Mode (Type of Original)

You can select the Copy resolution for your type of original. The default setting
is AUTO, which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text.
photographs.
1
Press Menu, 3, 1.
2
Press or
original (AUTO,
and then press Set.
3
Press Stop/Exit.
to scroll through the options for each setting. Press Set to
or
AUTO?
TEXT?
PHOTO?
-
1.CASSETTE #1
2.CASSETTE #2
and
Turning on Cassette #2 (Option for FAX-4100 and FAX-
to choose the type of
TEXT or PHOTO),
to select the next setting
+
THIN
PLAIN
THICK
THICKER
PHOTO
M A K I N G C O P I E S
is default
is used for copying
11 - 7